Enbo-4000 X Manual Powder Coating Application Device
The voltage coming with the cable with lower voltage, compared to the
gun, is increased to 100 kW thanks to the transformer and cascade group inside the gun, and it is carried to the gun tip with the electrode group. Transformer and cascade group are insulated with a two-component resin with high diesel electrical resistance.
Enbo-4000 X Manual Powder Spray Gun Features
Gun weight | 550 Gr |
Input Voltage | 13 V |
Output Voltage | 100 V |
Max current | 0.085 ma |
Max dyeing flow | 30 kg/h |
Voltage Cable | 5 m |
Paint hose | 5 m |
Enbo-4000 X Control Module
Control Module Consists Of Two Parts;
Electronic Control Module: It is the part where electronic card, transformer, voltage regulator, led indicator and fuses are located. Adjusts gun output voltage.
Pneumatic Control Module: It is the part where the solenoid valve, air regulators and manometers are located. It provides adjustment of paint outlet flow, pressure and tank relief air.
| Electricity requirement | 220V / 50Hz |
| Electricity consumption | 60 W |
| Max . Air consumption | 300 LT / Dak. |
| Max. Air pressure | 6 Bar |
| Max. Air oil ratio | 0.1 ppm |
| Max. Air humidity ratio | 1.3 Gr / Nm |